LM769349X/LM769310D Timken Tapered Roller Bearings
With 6.50 in Dimension D Min over 10170 full-service stores, our LM769349X/LM769310D Timken Tapered Roller Bearings inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving China Case Hydraulic Final Drive Motor Supplier time and your hard-earned dollars.
| Brand Name: |
Timken |
| Model Number: |
LM769349X/LM769310D |
| Dimension D Min: |
6.50 in |
| Oil Lubrication - T Seal: |
3500 rpm |
| Engineering Group: |
Mounted Bearing |
| Y2 - Geometry Factor: |
4.23 |
| Eng Internal Radial Clearance - Min: |
0.0030 |
| Grease Lubrication - M/N Seal: |
2000 rpm |
| Dimension D Max: |
7.88 in |
| Grease Lubrication - T Seal: |
3000 rpm |
Product Details
| Dimension D Min |
6.50 in |
| Oil Lubrication - T Seal |
3500 rpm |
| Engineering Group |
Mounted Bearing |
| Y2 - Geometry Factor |
4.23 |
| Eng Internal Radial Clearance - Min |
0.0030 |
| Grease Lubrication - M/N Seal |
2000 rpm |
| Dimension D Max |
7.88 in |
| Grease Lubrication - T Seal |
3000 rpm |
| Dimension H |
1.25 in |
| Eng Internal Radial Clearance - Max |
0.0037 |
| Dimension B |
5.25 in |
| C0 - Static Load |
39000 lb |
| Oil Lubrication - M/N Seal |
2000 rpm |
| Dimension SV |
3.14 in |
| Full Timken Part Number |
QVP12V204SB |
| Dimension RV |
0.05 in |
| C - Dynamic Load (Basic) |
38100 lb |
| Shaft Tolerance |
0.0015 in |
| Shaft Size Type |
Imperial |
| Pre Install Clearance Min |
0.0030 in |