| L6-16E9ZD Rotek Slewing Ring Bearings | Pre Install Clearance Max:0.145 mm; Grease Lubrication - B/C/O Seal:400 rpm; Housing Style:Round Flange; e - Geometry Factor:0.26; Float:0.083 in; Bearing Number:22226; Weight:115 lb; Pre Install Clearance Min:0.095 mm; Oil Lubrication - T Seal:1500 rpm; Locking Style:Double Concentric; Shaft Size :5 in; Dimension D:5.13 in; Y1 - Geometry Factor:2.43; Dimension M:1.99 in; Eng Internal Radial Clearance - Max:0.0057; |
| RKS.210841 SKF Slewing Ring Bearings | B - Inner Ring Width:80 mm; C1(2) - Dynamic Radial Rating (Two-Rows):949000 N; r - Outer Ring To Clear Radius2:2.500 mm; D:239.993 mm; da - Inner Ring Backing Diameter:144.0 mm; Reference Thermal Speed Rating (Grease):2200; Y1 - ISO Factor5:3.1; Superseded Part:22322YMW800C4; Design Unit:METRIC; Da - Outer Ring Backing Diameter:215.000 mm; C0 - Static Radial Rating:1050000 N; UPC Code:087796027176; |
| RKS.162.20.1904 SKF Slewing Ring Bearings | e - ISO Factor2:0.4; Series:LM545800; D:12.3750 in; Cg - Geometry Factor:0.134; Y - ISO Factor3:1.51; Da - Cup Frontface Backing Diameter:12.07 in; Design Units:Imperial; C - Cup Width:1.4375 in; Cup Part Number:LM545810; r - Cup Backface To Clear Radius1:0.130 in; Db - Cup Backface Backing Diameter:11.65 in; |
| RKS.23 0941 SKF Slewing Ring Bearings | D:3.9370 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:41500 lbf; db - Cone Backface Backing Diameter:2.87 in; T - Bearing Width across Cones:2.1874 in; d:2.3613 in; R - Cone Backface To Clear Radius1:0.14 in; Cup Part Number:28921DC; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:6180 lbf; r - Cup Frontface To Clear Radius2:0.03 in; Cg - Geometry Factor11:0.103; |
| RKS. 212140106001 SKF Slewing Ring Bearings | Lockwasher:MB13; Jmin:224 mm; Seal:TA513; Bolt Qty:2; Max Grease Speed:4200; Housing:SNT 513-611; A3:170 mm; Adapter Sleeve1:H313; A:110.00 mm; Material :Cast Iron; C0 Static Load Rating:216; Cage Type:EJ; Locating Rings (width x OD):SR120X10; L:275.00 mm; C1 Dynamic Load Rating:206; Max Oil Speed:5100; H2:30 mm; H:150.00 mm; Bearing:22213K; H1:80.0 mm; |
| M5-26P1 Rotek Slewing Ring Bearings | Shaft Size:5.5 in; Dimension B:10.5 in; Support Type:Take-Up; Bearing - Housing - Seal:LSE508BRHHTPS; Dimension Y:0.9 in; Bearing - Housing - Seal UPC:013992097682; Ca - Axial Load Rating:5799.99 lbf; Dimension P:1.0 in; Dimension S:3.0 in; Dimension D:15.7 in; Cr - Dynamic Load Rating:94869 lbf; Dimension N:17.2 in; Bearing Type:Split Cylindrical Re; Seal Type:High Temperature Pac; Dimension V:7.7 in; |
| A12-27E3 Rotek Slewing Ring Bearings | Cr - Dynamic Load Rating:94869 lbf; Maximum Speed:1570 rpm; Bearing - Housing - Seal:LSE503BRHATL; Dimension H:2.1 in; Cor - Static Load Rating:131513 lbf; Dimension V:7.7 in; Dimension P:1.0 in; Dimension D:15.7 in; Shaft Size:5-3/16 in; Dimension N:17.2 in; Series Type:Light Series; Dimension T:20.2 in; Support Type:Take-Up; Bearing - Housing - Seal UPC:013992045355; Ca - Axial Load Rating:5799.99 lbf; |
| RKS.161.14.0644 SKF Slewing Ring Bearings | Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0.04 in; Series:435; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:3600 lbf; D:3.7500 in; r - Cup Frontface To Clear Radius2:0.03 in; Cone Part Number:444; Y2 - ISO Factor10:3.53; Bearing Weight:4.8 lb; K - Factor7:2.05; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:12900 lbf; Y1 - ISO Factor9:2.37; e - ISO Factor8:0.28; |
| VLU200544 INA Slewing Ring Bearings | Weight:0.402 kg; Enclosure:Open; Dynamic Load Rating:49,000 N; Limiting Speed - Grease:8,500 rpm; Da (max):65 mm; D:72 mm; r1:0.6 mm; db (max):43 mm; d:35 mm; Radial Clearance:0.025 to 0.050 mm; Static Load Rating:51,000 N; db (min):40 mm; dc (min):46 mm; ra (max):1 mm; B:23 mm; Limiting Speed - Oil:10,000 rpm; Fillet Radius/Chamfer:1.1 mm; ra1 (max):0.6 mm; Bore Type:Cylindrical Bore; Configuration:Single Row; |
| L6-25P9Z Rotek Slewing Ring Bearings | D:460.000 mm; C1(2) - Dynamic Radial Rating (Two-Rows):2780000 N; Y0 - ISO Factor4:2.26; UPC Code:087796176348; Da - Outer Ring Backing Diameter:419.000 mm; Cg - Geometry Factor8:0.1206; B - Inner Ring Width:146 mm; Bearing Weight:96.800 Kg; d:280.000 mm; Y2 - ISO Factor6:2.21; Cage Type:EMB; r - Outer Ring To Clear Radius2:4.000 mm; e - ISO Factor3:0.3; da - Inner Ring Backing Diameter:318.000 mm; |
| RKS.160.14.1094 SKF Slewing Ring Bearings | Cup Part Number:354-B; Cone Part Number:358; R - Cone Backface To Clear Radius1:0.06 in; r - Cup Backface To Clear Radius2:0.06 in; Ab - Cage-Cone Frontface Clearance:0.09 in; T - Bearing Width to Flange:0.3125 in; da - Cone Frontface Backing Diameter:1.97 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2960 lbf; B - Cone Width:0.8540 in; D1 - Flange Outer Diameter:3.5299 in; C0 - Static Radial Rating:20000 lbf; |
| RKS.062.25.1424 SKF Slewing Ring Bearings | Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26600 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:149000 lbf; a - Effective Center Location3:-15 mm; G2 - Heat Generation Factor (Rib-Roller End):67; db - Cone Backface Backing Diameter:177.04 mm; Db - Cup Backface Backing Diameter:250.95 mm; d:152.400 mm; Aa - Cage-Cone Backface Clearance:7.9 mm; Bearing Weight:19.5 Kg; Design Units:Imperial; |
| RKS.220741 SKF Slewing Ring Bearings | UPC Code:999999999; Seal Type:Taconite; A3:235 mm; Jmax:326 mm; J:320.00 mm; H1:112.0 mm; Shaft Diameter db:115 mm; C0 Static Load Rating:502; G:M24; H2:40 mm; N:26 mm; C1 Dynamic Load Rating:435; Max Grease Speed:3100; Material :Cast Iron; H:218 mm; Jmin:314 mm; Bearing:22220; Locating Rings (width x OD):SR180X12; N1:32.00 mm; Seal:TA220; |
| RKS.122290101002 SKF Slewing Ring Bearings | Bolt Hole Spacing J:136.5 mm; Dynamic Load Rating:8130 lbf; Dimension L1:59.8 mm; Total Width A:2.031 in; Center of Bearing from End S:21.5 mm; Dimension T:1.016 in; Bolt Hole Length N1:26.2 mm; Base to Center Height H:49.21 mm; Seal Type:Tri-Ply Seal; Dimension B1:2.220 in; Bolt Hole Width N:14.3 mm; Static Load Rating:4460 lbf; Bearing Type:Ball Bearing; Inside Ring Width B:=Bearings1_Inside Ri; |
| No. | Brand | t | D | e | b | d | B | N | S |
| VSU201094 | INA | - | - | - | - | - | - | - | - |
| RKS.161.16.1644 | SKF | - | 480.000 mm | - | - | 320.000 mm | - | - | - |
| RKS.061.25.1754 | SKF | - | - | - | - | - | - | - | - |
| XSU080258 | INA | - | 71.999 mm | - | - | - | 23.813 mm | - | - |
| RKS.160.16.1424 | SKF | - | - | - | - | - | - | 18 mm | - |
| XSI140744-N | INA | - | 200 mm | - | - | 110 mm | 53 mm | - | - |
| XSA140844-N | INA | - | 260 mm | - | - | 120 mm | 55 mm | - | - |
| RKS.220741 | SKF | - | - | - | - | - | - | 26 mm | - |
| VSA250855-N | INA | - | - | - | - | 13.6875 in | - | - | - |
| VLI201094-N | INA | - | - | - | - | - | - | - | - |
| RKS.162.14.0944 | SKF | - | - | - | - | - | - | - | - |
| VSI200744-N | INA | - | - | - | - | - | - | - | - |
| RKS.23 1091 | SKF | - | 125 mm | - | - | 70 mm | 39.7 mm | - | - |
| RKS.425060201001 | SKF | - | 620.000 mm | - | - | 420.000 mm | - | - | - |
| VSA200544-N | INA | - | - | - | - | - | - | - | - |
| VU140325 | INA | - | 80.963 mm | - | - | - | 19.050 mm | - | - |
| RKS.061.20.0944 | SKF | - | - | - | - | - | - | - | - |
| A13-22P4 | Rotek | - | - | - | - | - | - | - | - |
| M4-12P4Z | Rotek | - | 71.996 mm | - | - | - | 22.385 mm | - | - |
| VLU200944 | INA | - | 400 mm | - | - | 260 mm | 140 mm | - | - |
| VU25038 | INA | - | - | - | - | - | - | 35 mm | - |
| RKS. 314310101001 | SKF | - | - | - | - | - | - | - | - |
| M4-16P4 | Rotek | - | 165 mm | - | - | 120 mm | 22 mm | - | - |
| RKS.062.20.0744 | SKF | - | - | - | - | - | - | - | - |
| L6-25P9ZD | Rotek | - | - | - | - | - | - | - | - |
| L6-25P9Z | Rotek | - | 460.000 mm | - | - | 280.000 mm | - | - | - |
| VSU200844 | INA | - | 140 mm | - | - | 80 mm | 33 mm | - | - |
| RKS.162.16.1754 | SKF | - | 100 mm | - | - | 55 mm | 33.3 mm | - | - |
| M4-12P4 | Rotek | - | - | - | - | 85 mm | 60 mm | - | - |
| A6-14P3D | Rotek | - | 72.238 mm | - | - | - | - | - | - |
VLA200744-N INA Slewing Ring Bearings Video
VLA200744-N Flanged Four point contact bearing (External
BRS specialized in producing INA Structure VLA200744-N Four point contact bearing (flanged inner ring,external gear teeth), and other precision slewing
Four point contact bearings VLA200744-N (Series VLA20)
Four point contact bearings VLA200744-N. (Series VLA20) light series 20, external gear teeth, lip seals on both sides. The datasheet is only an overview of
Four point contact bearings - VLA200744-N - medias
Di, 745,5 mm, Tolerance: +0,6/0. Di ZT, 747 mm, Valid for bearings with centring (suffix ZT) Centring lengths (T, t) (see dimension drawing) Tolerance: +IT8
INA VLA200744N Bearing, NOKS Bearings
INA VLA200744N Bearing Bearing, INA VLA200744N Bearing Bearings size and price
Ina USA Corp. | VLA200744-N | SLEWING RING, 4 POINT
Shop Ina USA Corp. VLA200744-N at Applied.com, which includes; Ball Bearing, 634 mm ID, 838.1 mm OD,56 mm Width
INA (Schaeffler) - VLA200744-N - Motion Industries
Buy INA (Schaeffler) Slewing Rings VLA200744-N direct from Motion Industries. Your proven service leader with reliable delivery since 1972
VLA200744-N INA • ABF Store
VLA200744-N INA available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8