| Case SR130 1-SPD Reman Hydraulic Final Drive Motor | radial dynamic load capacity:18600 lb; precision rating:ABEC 7 (ISO Cla; cage material:Phenolic Resin; closure type:Open; B:24 mm; radial static load capacity:12900 lb; series:3MM200WI; outer ring width:24 mm; D:125 mm; maximum rpm:10300 RPM; |
| Case KBA 14840 Hydraulic Final Drive Motor | set screw thread size:3/8-24 UNF; bearing bore diameter:1.6250 in; D:2.5000 in; manufacturer product page:Click here; B:0.7200 in; material:Steel; |
| Case KRA15440 Hydraulic Final Drive Motor | flange mounting type:Four-Bolt Piloted; bore type:Round; d:1-15/16 in; manufacturer catalog number:023129; lubrication type:Lubrication Fitting; maximum rpm:3050 RPM; expansion type:Non-Expansion Bearin; seal type:Triple Lip; locking device:Set Screw; bolt circle diameter:5.38 in; |
| Case KAA1137 Hydraulic Final Drive Motor | construction description:Guardian® Flange; width:0.7000 in; typical application:Exceptional Bearing; shaft diameter:2.9481 in; Weight:1.72 lbs; D:3.9480 in; lip material:Labyrinth; pressure tolerance:Ambient; continuous temperature range:-22 to 400°F; manufacturer catalog number:29602-0781; |
| Case KRA10150 Hydraulic Final Drive Motor | radial static load capacity:1780 lbf; d:1.0000 in; mounting type:Three-Bolt Flange; series:KHTM200; bore type:Round; housing material:Malleable Iron; length through bore:1-7/32"; lubrication type:Lubrication Fitting; replacement bearing:KH205-16; B:3.7500 in; |
| Case KBA14420R Hydraulic Final Drive Motor | expansion type:Non-Expansion Bearin; base to bore centerline:3.7500 in; radial static load capacity:9650 lb; B:3-1/4 in; d:2.6875 in; D:10-1/4 in; replacement bearing:G1211KRRB; radial dynamic load capacity:15600 lb; overall length:12.6250 in; base width:3-1/2 in; |
| Case IH 9230 2-SPD Reman Hydraulic Final Drive Motor | standards met:RoHS; additional details:Lead Free; D:22 mm; bearing material:PTFE with Fillers; maximum p value:7 N/mm2; maximum v value:1.65 m/s; overall length:20 mm; maximum pv value:1.0 N/mm2 x m&#; flange width:3 mm; |
| Case SR210 1-SPD Reman Hydraulic Final Drive Motor | flange width:1/8 in; sleeve bearing type:Flanged Bearing; D:1-1/2 in; maximum pv value:50000; standards met:RoHS, ASTM B438 Grad; bearing material:Bronze; maximum p value:2000 psi; maximum v value:1200 fp/min; material specification:SAE 841; overall length:1/2 in; |
| Case IH 87281653R Reman Hydraulic Final Drive Motor | thread direction:Left Hand; misalignment angle:19 º; race material:Steel; harmonization code:8483.30.8055; series:MG; manufacturer catalog:www.aurorabearing.co; ball width:31 mm; Weight:0.7 kg; thread type:-6H-LH; head diameter:60 mm; |
| Case SV250 2-SPD Reman Hydraulic Final Drive Motor | Weight:0.08 lbs; manufacturer product page:Click here; head diameter:0.8750 in; length to ball center:1.3750 in; d:03125 in; ball width:0.4370 in; housing material:Carbon Steel; rod end type:Female Threaded with; race material:Thermo-Plastic; shank thread size:5/16-24; |