| Case SV280 1-SPD Reman Hydraulic Final Drive Motor | lubrication type:Lubrication Fitting; slot spacing:2.2500 in; series:MUCT200NP; rod hole diameter:55/64 in; housing material:Cast Iron - Nickel P; seal type:Contact with Slinger; overall height:4-1/64 in; d:1.2500 in; slot width:0.4688 in; overall length:4-29/64 in; |
| Case SV250 1-SPD Reman Hydraulic Final Drive Motor | standards met:ABMA, ISO; seal type:Contact Seal; overall height:7.7500 in; base to bore centerline:3.7500 in; mounting:Four-Bolt Base; overall length:13.7500 in; D:10.5625 to 11.5000 i; B:5.0000 in; replacement bearing:RCI-307; base width:4.5000 in; |
| Case PU53D00016F1 Hydraulic Final Drive Motor | bore type:Round; row type & fill slot:Single Row Non-Fill; cage material:Steel; dynamic load capacity:10700 lbf; closure type:Double Sealed; static load capacity:7310 lbf; internal clearance:C0; precision rating:ABEC 1 (ISO Cla; series:200-S; fillet radius:1.5 mm; |
| Case KBA 14840 Hydraulic Final Drive Motor | set screw thread size:3/8-24 UNF; bearing bore diameter:1.6250 in; D:2.5000 in; manufacturer product page:Click here; B:0.7200 in; material:Steel; |
| Case CX75 Hydraulic Final Drive Motor | B:19 mm; internal clearance:C0; D:85 mm; finish/coating:Uncoated; lubrication hole type:No Holes; operating temperature range:Maximum of +120; d:45 mm; precision rating:Not Rated; fillet radius:1 mm; cage type:Inner Ring Guided; |
| Case SR250 1-SPD Reman Hydraulic Final Drive Motor | static load capacity:317 lbs; d:0.3750 in; finish/coating:Uncoated; row type & fill slot:Single Row Non-Fill; snap ring included:Without Snap Ring; B:0.2812 in; dynamic load capacity:750 lb; maximum rpm:36000 rpm; series:R; D:0.8750 in; |
| Case IH 7088 Reman Hydraulic Final Drive Motor | locking device:Eccentric Collar; base to bore centerline:2.2500 in; housing material:Cast Iron; expansion type:Non-Expansion Bearin; standards met:ANSI/ABMA STD 9; finish/coating:Powder Coated; bearing type:Spherical Roller; base width:2-1/2 in; radial dynamic load capacity:23400 lb; overall length:8.8750 in; |
| Case IH 87726688 Reman Hydraulic Final Drive Motor | d:17 mm; D:76.2 mm; maximum rpm:7500 RPM; series:203; finish/coating:Uncoated; bore type:Round; standards met:UL, AFBMA, AGMA, ASM; seal type:Contact Seal; length through bore:29.7 mm; duty type:Standard Duty; |
| Case KBA1322 Hydraulic Final Drive Motor | harmonization code:848330; D:1-1/4 in; bearing material:Sintered Bronze Oil-; d:7/8 in; material specification:CT-1000-K26, SAE841; standards met:RoHS, REACH, DRC Con; overall length:1-1/4 in; flange width:1/8 in; sleeve bearing type:Flanged Bearing; |
| Case KRA15440 Hydraulic Final Drive Motor | flange mounting type:Four-Bolt Piloted; bore type:Round; d:1-15/16 in; manufacturer catalog number:023129; lubrication type:Lubrication Fitting; maximum rpm:3050 RPM; expansion type:Non-Expansion Bearin; seal type:Triple Lip; locking device:Set Screw; bolt circle diameter:5.38 in; |