| Case KAA1132 Eaton Hydraulic Final Drive Motor | length through bore:1.98 in; expansion type:Non-Expansion Bearin; d:1.5000 in; bore type:Round; mounting type:Two-Bolt Flange; D:5.6563 in; manufacturer catalog number:123615; standards met:UL, AFBMA, AGMA, ASM; radial dynamic load capacity:7332 lb; finish/coating:Uncoated; |
| Case IH 87661747R Reman Hydraulic Final Drive Motor | compatible cup:HH814510; bearing material:Chrome Steel; static load capacity:101000 lbf; operating temperature range:-65 to +250 &de; series:HH814500; finish/coating:Uncoated; cone width:2.0750 in; d:2.3750 in; cage material:Steel; inner ring width:2.075 in; |
| Case KRA1426 Hydraulic Final Drive Motor | static load capacity:2600 N; internal clearance:C0; maximum rpm:34500 RPM; closure type:Double Shielded; bore type:Round; outer ring width:9 mm; finish/coating:Uncoated; row type & fill slot:Single Row Non-Fill; dynamic load capacity:6600 N; standards met:DIN 625-1; |
| Case CX370B Hydraulic Final Drive Motor | locking device:Eccentric Collar; housing material:Cast Iron; radial static load capacity:490 kgf; bolt size:M10; d:17 mm; bore type:Round; overall length:114 mm; series:KHLLP200; replacement bearing:KH203; B:34.6 mm; |
| Case SV330 1-SPD Reman Hydraulic Final Drive Motor | manufacturer upc number:7316576671845; thread size:8.628-8; lock washer number:W36; overall length:6.6930 in; series:SK; taper:1:12; lock nut number:AN36; compatible shaft diameter:7.8740 in; |
| Case SR200 2-SPD Reman Hydraulic Final Drive Motor | operating temperature range:Maximum of +225; material specification:BOSTonE; maximum p value:1000 psi; bearing material:Nylon Lining; overall length:7/16 in; flange width:1/16 in; groove/plug type:None; maximum pv value:20000; maximum v value:400 fp/min; sleeve bearing type:Flanged Bearing; |
| Case IH 87281653R Reman Hydraulic Final Drive Motor | thread direction:Left Hand; misalignment angle:19 º; race material:Steel; harmonization code:8483.30.8055; series:MG; manufacturer catalog:www.aurorabearing.co; ball width:31 mm; Weight:0.7 kg; thread type:-6H-LH; head diameter:60 mm; |
| Case IH 87300716R Reman Hydraulic Final Drive Motor | internal clearance:C0; static load capacity:7900 N; finish/coating:Uncoated; standards met:DIN 625-1; precision rating:Not Rated; d:20 mm; closure type:Single Shield; series:63; D:52 mm; fillet radius:1 mm; |
| Case IH AFX 8010 1-SPD Reman Hydraulic Final Drive Motor | B:10 mm; row type & fill slot:Single Row Non-Fill; bore type:Round; closure type:Open; D:35 mm; snap ring included:Without Snap Ring; d:17 mm; manufacturer upc number:8865590440597; maximum rpm (grease):20000 rpm; manufacturer catalog:Click here; |
| Case PH15V00012F1 Hydraulic Final Drive Motor | maximum rpm:6500 RPM; seal type:Contact Seal; expansion type:Non-Expansion Bearin; length through bore:39.6 mm; radial dynamic load capacity:18993 N; finish/coating:Uncoated; lubrication type:Lubrication Fitting; series:206; D:82.6 mm; duty type:Standard Duty; |