| Case LJ018710 Hydraulic Final Drive Motor | replacement bearing:2-27 HT; lubrication type:Lubrication Fitting; mounting:Two-Bolt Base; overall length:9.5000 in; manufacturer catalog number:724278; series:NPL; operating temperature range:Max 400°; d:2.4375 in; base width:2.7500 in; D:6.8750 to 7.6250 in; |
| Case IH 7010 1-SPD Reman Hydraulic Final Drive Motor | ball material:52100 BEARING STEEL; length to ball center:30 mm; shank thread size:M6 x 1.0; lubrication type:With Lubrication Fit; thread direction:Left Hand; grade:Precision; d:6 mm; series:MH; lubrication:Unlubricated; housing material:Alloy Steel - heat t; |
| Case IH 87726688 Reman Hydraulic Final Drive Motor | d:17 mm; D:76.2 mm; maximum rpm:7500 RPM; series:203; finish/coating:Uncoated; bore type:Round; standards met:UL, AFBMA, AGMA, ASM; seal type:Contact Seal; length through bore:29.7 mm; duty type:Standard Duty; |
| Case SR220 2-SPD Reman Hydraulic Final Drive Motor | D:12 mm; manufacturer upc number:4547359158250; d:8 mm; |
| Case IH 7140 TIER 4B Reman Hydraulic Final Drive Motor | adapter sleeve part number:S-134, S-34; material:Steel; lock washer or locking device part number:W34; face diameter:8.031 in; lock nut type:For Lock Washer; thread size:6.659-8 in; D:8-21/32 in; series:AN; |
| Case KAA1137 Hydraulic Final Drive Motor | construction description:Guardian® Flange; width:0.7000 in; typical application:Exceptional Bearing; shaft diameter:2.9481 in; Weight:1.72 lbs; D:3.9480 in; lip material:Labyrinth; pressure tolerance:Ambient; continuous temperature range:-22 to 400°F; manufacturer catalog number:29602-0781; |
| Case CX75C SR Aftermarket Hydraulic Final Drive Motor | grade:Precision; radial static load capacity:43451 lbs; housing material:Carbon Steel - Corro; series:KM-T; shank thread size:1-12 in; ball width:1.375 in; thread direction:Right Hand; ball material:52100 Bearing Steel; standards met:SAEJ1120; race material:Steel; |
| Case KSA10222 Hydraulic Final Drive Motor | series:206; lubrication type:Lubrication Fitting; locking device:Adapter Sleeve; manufacturer catalog number:129697; D:3.2500 in; B:4.2500 in; expansion type:Non-Expansion Bearin; bore type:Round; d:1.0000 in; radial static load capacity:2538 lb; |
| Case IH 5140 TIER4 Reman Hydraulic Final Drive Motor | bolt size:M14; d:40 mm; base width:54 mm; D:84 mm; lubrication type:Lubrication Fitting; mounting:Tapped Base; series:UEPA200NP; B:58.2 mm; overall length:116 mm; seal type:Contact with Slinger; |
| Case IH 5140 TIER 4B Reman Hydraulic Final Drive Motor | Angle Size:3-1/2 X 3-1/2 X 3/8; Material Type:CARBON STEEL; Brand:Baldor-Dodge; UPC:782475018796; Ship Weight:59 LB; Screw Treatment:ZINC PLATED; Frame Size:40; Screw Diameter:1.0000 in; Special Coating:STANDARD PAINT; Take-Up Frame Travel:18.0000 in; |