| Case SV250 2-SPD Reman Hydraulic Final Drive Motor | Weight:0.08 lbs; manufacturer product page:Click here; head diameter:0.8750 in; length to ball center:1.3750 in; d:03125 in; ball width:0.4370 in; housing material:Carbon Steel; rod end type:Female Threaded with; race material:Thermo-Plastic; shank thread size:5/16-24; |
| Case KNA10460 Hydraulic Final Drive Motor | outer ring width:1.0927 in; seal type:Contact/Lip; d:1.7500 in; series:ER; D:85 mm; inner ring width:1.9375 in; bore type:Round; finish/coating:Uncoated; radial static load capacity:4590 lb; locking device:Concentric Collar; |
| Case SV280 1-SPD Reman Hydraulic Final Drive Motor | lubrication type:Lubrication Fitting; slot spacing:2.2500 in; series:MUCT200NP; rod hole diameter:55/64 in; housing material:Cast Iron - Nickel P; seal type:Contact with Slinger; overall height:4-1/64 in; d:1.2500 in; slot width:0.4688 in; overall length:4-29/64 in; |
| Case IH 8240 2-SPD Reman Hydraulic Final Drive Motor | lock washer number:AW06X; lock nut number:AN06; lock nut outside diameter:2.0472 in; manufacturer product page:Click here; d:1.1875 in; material / coating:Steel; overall length:1.3780 in; includes:Adapter, Sleeve with; series:HA; |
| Case IH 6130 Reman Hydraulic Final Drive Motor | closure type:Open; number of rows:One; precision rating:Not Rated; d:7/8 in; drawn cup type:Open Ends; static load capacity:2400 lbf; B:3/8 in; standards met:ABMA 18.2 - 1982; dynamic load capacity:1850 lbf; D:1-1/8 in; |
| Case KBA 14840 Hydraulic Final Drive Motor | set screw thread size:3/8-24 UNF; bearing bore diameter:1.6250 in; D:2.5000 in; manufacturer product page:Click here; B:0.7200 in; material:Steel; |
| Case IH 87281653R Reman Hydraulic Final Drive Motor | thread direction:Left Hand; misalignment angle:19 º; race material:Steel; harmonization code:8483.30.8055; series:MG; manufacturer catalog:www.aurorabearing.co; ball width:31 mm; Weight:0.7 kg; thread type:-6H-LH; head diameter:60 mm; |
| Case SR150 1-SPD Reman Hydraulic Final Drive Motor | Hydraulic nut:HMV 38 E; Mass adapter sleeve assembly:7.25 kg; material / coating:Steel; B4:30.5 mm; Lock nut:KML 38; lock nut outside diameter:220 mm; includes:Lock Washer (MB; overall length:112 mm; d3:220 mm; G:M 190x3; |
| Case PH15V00012F1 Hydraulic Final Drive Motor | maximum rpm:6500 RPM; seal type:Contact Seal; expansion type:Non-Expansion Bearin; length through bore:39.6 mm; radial dynamic load capacity:18993 N; finish/coating:Uncoated; lubrication type:Lubrication Fitting; series:206; D:82.6 mm; duty type:Standard Duty; |
| Case CX75 Hydraulic Final Drive Motor | B:19 mm; internal clearance:C0; D:85 mm; finish/coating:Uncoated; lubrication hole type:No Holes; operating temperature range:Maximum of +120; d:45 mm; precision rating:Not Rated; fillet radius:1 mm; cage type:Inner Ring Guided; |