| Case CX50B Hydraulic Final Drive Motor | d:2-7/16 in; locking device:Double Set Screw; housing construction:Split Flange Mount; bearing type:Tapered Roller; standards met:UL, AFBMA, AGMA, ASM; expansion type:Non-Expansion Bearin; manufacturer catalog number:023435; lubrication type:Lubrication Fitting; duty type:Standard Duty; finish/coating:Uncoated; |
| Case PU53D00016F1 Hydraulic Final Drive Motor | bore type:Round; row type & fill slot:Single Row Non-Fill; cage material:Steel; dynamic load capacity:10700 lbf; closure type:Double Sealed; static load capacity:7310 lbf; internal clearance:C0; precision rating:ABEC 1 (ISO Cla; series:200-S; fillet radius:1.5 mm; |
| Case IH 6088 Reman Hydraulic Final Drive Motor | series:VB 200; seal type:Single Lip Contact; locking device:Concentric Collar; D:2.4409 in; outer ring width:0.7031 in; inner ring width:1.5625 in; bore type:Round; cage material:Plastic; radial static load capacity:2567 lb; bearing material:52100 Steel; |
| Case IH 7130 Reman Hydraulic Final Drive Motor | radial static load capacity:830 lbf; manufacturer upc number:637401026324; D:3.0000 in; series:RBC®; d:2.5000 in; standards met:AISI 440C; fillet radius:0.025 in; axial dynamic load capacity:1320 lbf; finish/coating:Uncoated; cage material:Brass/Composite; |
| Case CX75 Hydraulic Final Drive Motor | B:19 mm; internal clearance:C0; D:85 mm; finish/coating:Uncoated; lubrication hole type:No Holes; operating temperature range:Maximum of +120; d:45 mm; precision rating:Not Rated; fillet radius:1 mm; cage type:Inner Ring Guided; |
| Case SR200 2-SPD Reman Hydraulic Final Drive Motor | operating temperature range:Maximum of +225; material specification:BOSTonE; maximum p value:1000 psi; bearing material:Nylon Lining; overall length:7/16 in; flange width:1/16 in; groove/plug type:None; maximum pv value:20000; maximum v value:400 fp/min; sleeve bearing type:Flanged Bearing; |
| Case CX350DLC Hydraulic Final Drive Motor | d:0.5000 in; thread direction:Left Hand; housing material:Steel; grade:Precision; misalignment angle:5 °; shank thread size:1/2-20 in; shank thread length:1-1/2 in; operating temperature range:-30 to +300 &de; rod end type:Male Threaded; ball width:5/8 in; |
| Case SR150 1-SPD Reman Hydraulic Final Drive Motor | Hydraulic nut:HMV 38 E; Mass adapter sleeve assembly:7.25 kg; material / coating:Steel; B4:30.5 mm; Lock nut:KML 38; lock nut outside diameter:220 mm; includes:Lock Washer (MB; overall length:112 mm; d3:220 mm; G:M 190x3; |
| Case KAA1132R Aftermarket Hydraulic Final Drive Motor | d:1.3750 in; B:0.7500 in; thrust bearing type:Single-Direction; dynamic load capacity:9500 lbf; maximum rpm:3000 RPM; D:2.4690 in; series:B; bearing material:Steel; outside diameter design:Straight; race type:Grooved; |
| Case IH 5140 Reman Hydraulic Final Drive Motor | compatible cone:LM757049, LM757049A,; manufacturer upc number:053893682396; finish/coating:Uncoated; cup width:1.8750 in; material:Chrome Steel; lubrication hole type:No Hole; series:LM; D:16.0000 in; single or double cup:Single Cup; flange type:Non-Flanged Cup; |