| Case IH 7010 1-SPD Reman Hydraulic Final Drive Motor | ball material:52100 BEARING STEEL; length to ball center:30 mm; shank thread size:M6 x 1.0; lubrication type:With Lubrication Fit; thread direction:Left Hand; grade:Precision; d:6 mm; series:MH; lubrication:Unlubricated; housing material:Alloy Steel - heat t; |
| Case KBA14420R Hydraulic Final Drive Motor | expansion type:Non-Expansion Bearin; base to bore centerline:3.7500 in; radial static load capacity:9650 lb; B:3-1/4 in; d:2.6875 in; D:10-1/4 in; replacement bearing:G1211KRRB; radial dynamic load capacity:15600 lb; overall length:12.6250 in; base width:3-1/2 in; |
| Case PW15V00018F3 Hydraulic Final Drive Motor | cage material:Brass Cage; D:140 mm; bore type:Straight; B:48 mm; d:65 mm; manufacturer upc number:087796267411; internal clearance:C4; |
| Case SR160 1-SPD Reman Hydraulic Final Drive Motor | cage material:Brass; d:460 mm; lubrication hole type:Lubrication Groove &; precision rating:Not Rated; fillet radius:6 mm; bore type:Straight; D:760 mm; closure type:Open; internal clearance:C3; finish/coating:Uncoated; |
| Case IH 87726688 Reman Hydraulic Final Drive Motor | d:17 mm; D:76.2 mm; maximum rpm:7500 RPM; series:203; finish/coating:Uncoated; bore type:Round; standards met:UL, AFBMA, AGMA, ASM; seal type:Contact Seal; length through bore:29.7 mm; duty type:Standard Duty; |
| Case SR220 1-SPD Reman Hydraulic Final Drive Motor | width:0.6250 in; lip material:Labyrinth; manufacturer catalog number:29619-7248; Weight:1.08 lbs; D:3.3120 in; pressure tolerance:Ambient; typical application:Exceptional Bearing; construction description:Guardian® Flange; continuous temperature range:-22 to 400°F; misalignment tolerance:0.020 in; |
| Case IH 84280362R Reman Hydraulic Final Drive Motor | bore type:Round; d:4 mm; manufacturer catalog number:2813; D:16 mm; snap ring included:Without Snap Ring; closure type:Open; B:5 mm; |
| Case IH 87300717R Reman Hydraulic Final Drive Motor | Shaft Attachment (2):D-Lock; Flinger Material:Steel; Bearing Bore Shape:Round; Housing Type:Tapped Base Pillow B; Ball Bearing Housing Series:208 Series; End Cap Groove:No; Bearing Series:208 Series; Housing Material:Cast Iron; Bearing Insert Material:Steel; Expansion Type:Non-Expansion; |
| Case IH AFX 8010 2-SPD Reman Hydraulic Final Drive Motor | operating temperature range:-212 to +350 &d; maximum pv value:20000; sleeve bearing type:Plain Sleeve; bearing material:PTFE Lining; maximum v value:150 fp/min; overall length:1-1/4 in; backing material:Epoxy Fiberglass; maximum p value:34300 psi; D:1 in; groove/plug type:None; |
| Case SV300 2-SPD Reman Hydraulic Final Drive Motor | series:1SP-B1025; outer ring width:0.6700 in; finish/coating:Zinc Plated; static load capacity:155 lbs; D:1.5260 in; bore type:Hex; outside diameter design:Flanged; precision rating:Not Rated; d:0.4500 in; bearing material:Steel; |