| Case IH 1680 Reman Hydraulic Final Drive Motor | material:Steel; diameter:1/16 in; length:1-7/8 in; finish:Polished; |
| Case KLA0134 Hydraulic Final Drive Motor | inner ring width:2.5625 in; operating temperature range:200°; B:2.5625 in; seal type:Extra Low Drag Felt; series:ER; duty type:Standard Duty; outer ring width:1.2500 in; radial dynamic load capacity:11789 lb; manufacturer catalog number:705038; bore type:Round; |
| Case PX15V00025F1 Hydraulic Final Drive Motor | length through bore:0.972 in; bracket width:2-7/16 in; unit standoff:1-25/32 in; series:MBFBL200CEW; housing material:PBT Thermoplastic; vertical bolt spacing:7/8 in; duty type:Standard Duty; d:0.7500 in; mounting type:Three-Bolt Bracket S; locking device:Set Screw; |
| Case IH 7140 TIER 4B Reman Hydraulic Final Drive Motor | adapter sleeve part number:S-134, S-34; material:Steel; lock washer or locking device part number:W34; face diameter:8.031 in; lock nut type:For Lock Washer; thread size:6.659-8 in; D:8-21/32 in; series:AN; |
| Case CX75 Hydraulic Final Drive Motor | B:19 mm; internal clearance:C0; D:85 mm; finish/coating:Uncoated; lubrication hole type:No Holes; operating temperature range:Maximum of +120; d:45 mm; precision rating:Not Rated; fillet radius:1 mm; cage type:Inner Ring Guided; |
| Case CX350DLC Hydraulic Final Drive Motor | d:0.5000 in; thread direction:Left Hand; housing material:Steel; grade:Precision; misalignment angle:5 °; shank thread size:1/2-20 in; shank thread length:1-1/2 in; operating temperature range:-30 to +300 &de; rod end type:Male Threaded; ball width:5/8 in; |
| Case SR210 1-SPD Reman Hydraulic Final Drive Motor | flange width:1/8 in; sleeve bearing type:Flanged Bearing; D:1-1/2 in; maximum pv value:50000; standards met:RoHS, ASTM B438 Grad; bearing material:Bronze; maximum p value:2000 psi; maximum v value:1200 fp/min; material specification:SAE 841; overall length:1/2 in; |
| Case KMA1321 Hydraulic Final Drive Motor | roller diameter:0.8750 in; d:0.2500 in; roller material:Chrome Steel; manufacturer catalog number:4080510000; series:Inch CAMROL (CY; B:0.5625 in; closure type:Sealed; lubrication hole location:Inner Ring; maximum rpm:5400 rpm; bearing element:Needle Rollers; |
| Case IH 87661747 Reman Hydraulic Final Drive Motor | radial static load capacity:1150 kgf; base width:41 mm; bolt size:M12; replacement bearing:UC206C4HR23; overall height:81 mm; lubrication type:Lubrication Fitting; mounting:Two-Bolt Base; series:UCLP200C4HR23; bore type:Round; overall length:165 mm; |
| Case IH 87726688 Reman Hydraulic Final Drive Motor | d:17 mm; D:76.2 mm; maximum rpm:7500 RPM; series:203; finish/coating:Uncoated; bore type:Round; standards met:UL, AFBMA, AGMA, ASM; seal type:Contact Seal; length through bore:29.7 mm; duty type:Standard Duty; |