| Case CX370B Hydraulic Final Drive Motor | locking device:Eccentric Collar; housing material:Cast Iron; radial static load capacity:490 kgf; bolt size:M10; d:17 mm; bore type:Round; overall length:114 mm; series:KHLLP200; replacement bearing:KH203; B:34.6 mm; |
| Case CX370C Hydraulic Final Drive Motor | Special Coating:STANDARD PAINT; Brand:Baldor-Dodge; Screw Diameter:0.7500 in; UPC:782475019144; Take-Up Frame Style:LIGHT DUTY; Frame Size:10; Material Type:CARBON STEEL; Ship Weight:11.52 LB; Angle Size:2 X 2 X 1/4; Screw Treatment:ZINC PLATED; |
| Case IH 5130 2-SPD Reman Hydraulic Final Drive Motor | cage material:Steel; internal clearance:C3; dynamic load capacity:10700 N; closure type:Single Shield; static load capacity:5900 N; D:47 mm; precision rating:ABEC 1 (ISO Cla; B:12 mm; fillet radius:0.6 mm; standards met:DIN 625-1; |
| Case CX75C SR Aftermarket Hydraulic Final Drive Motor | grade:Precision; radial static load capacity:43451 lbs; housing material:Carbon Steel - Corro; series:KM-T; shank thread size:1-12 in; ball width:1.375 in; thread direction:Right Hand; ball material:52100 Bearing Steel; standards met:SAEJ1120; race material:Steel; |
| Case IH 87726688 Reman Hydraulic Final Drive Motor | d:17 mm; D:76.2 mm; maximum rpm:7500 RPM; series:203; finish/coating:Uncoated; bore type:Round; standards met:UL, AFBMA, AGMA, ASM; seal type:Contact Seal; length through bore:29.7 mm; duty type:Standard Duty; |
| Case IH 1979869C1 Reman Hydraulic Final Drive Motor | Category:Bearings; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:9.525; Product Group:M06288; |
| Case IH 84280361 Reman Hydraulic Final Drive Motor | lubrication type:Lubrication Fitting; finish/coating:Uncoated; duty type:Normal Duty; replacement bearing:2-111D ATO; expansion type:Non-Expansion Bearin; B:2.3750 in; d:1.6875 in; overall length:7.5000 in; base width:2.1250 in; seal type:Felt Seal; |
| Case SV250 2-SPD Reman Hydraulic Final Drive Motor | Weight:0.08 lbs; manufacturer product page:Click here; head diameter:0.8750 in; length to ball center:1.3750 in; d:03125 in; ball width:0.4370 in; housing material:Carbon Steel; rod end type:Female Threaded with; race material:Thermo-Plastic; shank thread size:5/16-24; |
| Case KRA10150 Hydraulic Final Drive Motor | radial static load capacity:1780 lbf; d:1.0000 in; mounting type:Three-Bolt Flange; series:KHTM200; bore type:Round; housing material:Malleable Iron; length through bore:1-7/32"; lubrication type:Lubrication Fitting; replacement bearing:KH205-16; B:3.7500 in; |
| Case KBA14420R Hydraulic Final Drive Motor | expansion type:Non-Expansion Bearin; base to bore centerline:3.7500 in; radial static load capacity:9650 lb; B:3-1/4 in; d:2.6875 in; D:10-1/4 in; replacement bearing:G1211KRRB; radial dynamic load capacity:15600 lb; overall length:12.6250 in; base width:3-1/2 in; |