| Doosan DX470LCV Hydraulic Final Drive Motor | Basic Load Rating, Static Rating(N):3850; Unit Body Material:Stainless Steel; Diameter series symbol:Used for Light load; Surface Treatment:No; Rolling Element Material:Stainless Steel; Bearing Inner Dia. Shape:Cylindrical Bore Set; RoHS:6; Pillow Type, Category:Standard; d:12; |
| Doosan 133-00230A Hydraulic Final Drive Motor | Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Seals:DD (Contact Rubber S; Flange O.D. H(φ):44; Bearing I.D. d(mm):15; |
| Doosan 133-00229A Hydraulic Final Drive Motor | s1:21.75 mm; Dz:100 mm; J:159 mm; N:20mm; Z:74.6 mm; Designation of open end cover:SCOU210-31; Designation of housing:PH210N-; H2:165 mm; H1:22 mm; Weight:3.7 kg; |
| Doosan DX340LCV Hydraulic Final Drive Motor | T min.:-20 °C; H:98 mm; G:R1/8"; Designation of bearing:EX206G2L3; Z:69 mm; L:274 mm; A5:18.2 mm; SW:4 mm; C:19.5 kN; B1:48.3 mm; |
| Doosan DX180LC Hydraulic Final Drive Motor | E:18 mm; H1:13 mm; J:66 mm; Weight:1.08 kg; B:23.8 mm; H:42.9 mm; A:48 mm; Dz:70 mm; C:19.5 kN; s1:27.8 mm; |
| Doosan DX300LC Hydraulic Final Drive Motor | L1:225 mm; Z:54.4 mm; Designation of open end cover:SCOU207-21; H:98 mm; s1:21.45 mm; C0:15.2 kN; Recommended tightening torque for set screw:8 Nm; Weight:2.02 kg; T max.:100 °C; Designation of housing:SP206-207/72N-; |
| Doosan DX225LC Hydraulic Final Drive Motor | A1:16 mm; J:202 mm; H3:130; B:65.1 mm; Designation of bearing:UC212-38G2; T max.:100 °C; Weight:3.73 kg; A2:69.7 mm; s1:32.55 mm; S:25.4 mm; |
| Doosan DX450LC-V Hydraulic Final Drive Motor | Bearing Part Number:628; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):13; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Days to Ship:7 Days; Flange Shape:Square Type; Shape:Flanged Pilot Type; |
| Doosan 170401-00079 Hydraulic Final Drive Motor | Radial clearance class:CN; Characteristic inner ring frequency, BPFI:5.42 Hz; Characteristic outer ring frequency, BPF0:3.58 Hz; da max:39 mm; Nlim (grease):11,000 rpm; Min operating temperature, Tmin:-25 °C; Dynamic load, C:19.5 kN; Characteristic rolling element frequency, BSF:4.68 Hz; da min:35 mm; Max operating temperature, Tmax:110 °C; |
| Doosan S220-V Hydraulic Final Drive Motor | Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Basic Load Rating, Static Rating(N):29400; Seal:Silicone; Unit Body Material:Cast Iron; Fit:J7; Rolling Element Material:Bearing Steel; Stroke:No; |