| Doosan 2401-9229A Hydraulic Final Drive Motor | Type:Bearings with Housin; Bearing Retained:No; Width T(mm):25 ～ 40; Flange Shape:Compact Type; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; RoHS:6; Shape:Flange Type; Bearing I.D. d(mm):12; |
| Doosan DX490LC Hydraulic Final Drive Motor | d:70; D_:150; Prod_Type3:DGBB_SR_ZZ; C_conv:104000; SBRG:3; SDM_:110; Z_:8; C:104; yobi:6314ZZ; LangID:1; |
| Doosan DX225LC Hydraulic Final Drive Motor | A1:16 mm; J:202 mm; H3:130; B:65.1 mm; Designation of bearing:UC212-38G2; T max.:100 °C; Weight:3.73 kg; A2:69.7 mm; s1:32.55 mm; S:25.4 mm; |
| Doosan DX360 Hydraulic Final Drive Motor | Da max:30 mm; Radial clearance class:C3; rs min:0.3 mm; Brand:SNR; Max operating temperature, Tmax:120 °C; Mass:0.04 kg; B:13 mm; Nlim:14,000 rpm; Dynamic load, C:5.5 kN; Min operating temperature, Tmin:-20 °C; |
| Doosan DX340LC Hydraulic Final Drive Motor | Surface Treatment:No; Fit:J7; Accessory:No Cover; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; d:65; Grease Type:Standard Grease; Basic Load Rating, Dynamic Rating(N):57200; |
| Doosan 133-00229A Hydraulic Final Drive Motor | s1:21.75 mm; Dz:100 mm; J:159 mm; N:20mm; Z:74.6 mm; Designation of open end cover:SCOU210-31; Designation of housing:PH210N-; H2:165 mm; H1:22 mm; Weight:3.7 kg; |
| Doosan DX500LCV Hydraulic Final Drive Motor | N1:17 mm; H:31.8 mm; Weight:0.79 kg; d:12 mm; d1:32.4 mm; G:M6x1; s1:30.5 mm; N:11mm; B:34 mm; H2:63.7 mm; |
| Doosan DX300LC Hydraulic Final Drive Motor | L1:225 mm; Z:54.4 mm; Designation of open end cover:SCOU207-21; H:98 mm; s1:21.45 mm; C0:15.2 kN; Recommended tightening torque for set screw:8 Nm; Weight:2.02 kg; T max.:100 °C; Designation of housing:SP206-207/72N-; |
| Doosan S220-3 Hydraulic Final Drive Motor | A:26 mm; T min.:-20 °C; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:FLE203-; H:99 mm; Designation of bearing:ES203G2; C:9.55 kN; A1:9.5 mm; T max.:100 °C; B1:28.6 mm; |
| Doosan 170401-00079 Hydraulic Final Drive Motor | Radial clearance class:CN; Characteristic inner ring frequency, BPFI:5.42 Hz; Characteristic outer ring frequency, BPF0:3.58 Hz; da max:39 mm; Nlim (grease):11,000 rpm; Min operating temperature, Tmin:-25 °C; Dynamic load, C:19.5 kN; Characteristic rolling element frequency, BSF:4.68 Hz; da min:35 mm; Max operating temperature, Tmax:110 °C; |